Home > Install Guide >General Installation Tips
General Installation Tips
Please Read Before Installing! | TOOLS & TIPS |
|
Your auto restoration plans are coming along and you're ready to install the finishing touches with the best rubber weatherstripping from METRO. Here are a few simple tools, tips and techniques that
will give your project a real professional finish. |
Apply a water-based lubricant/protectant such as Armorall, or a silicone based furniture polish like Lemon Pledge, to METRO parts where noted in the instructions. Among other things, these lubricants/protectants will allow you to more easily slide fitted rubber parts into cavities or channels. Always use a clean rag to apply these product. METRO's SUPERSoft rubber is designed for long life and
superior sealing qualities. To assure that your installation takes best
advantage of these products, we suggest you use the 3M Super Black Weatherstrip
Adhesive #08008. |
For removing old rubber and any remaining adhesive residue, try the 3M Weatherstrip Adhesive Release Agent #8971. Cover any adjoining finished auto body surfaces prior to application with masking tape. This is especially important when applying glue. Simple tools are needed for the installation, such as a Phillips head screwdriver, pliers, and a sharp knife or razor blade. Masking tape will protect your car's finish when removing or installing rubber. A color crayon may be used to match and mark the anchor
holes. * Super glues can be used to repair rubber if it tears during installation. * We recommend 60-grit sandpaper to lightly roughen the rubber surface that will bond next to your car so that your rubber adheres better when using an adhesive. * Use a clean rag to wipe and dry your car surface prior to applying your weatherstripping. |